cloning systems – Hydroponic Economics

GUIDE:How to Successfully Take Plant Cuttings From a Mother Plant

The key to keeping mother plants small lies in taking strong cuttings. Strong cuttings will root fast and grow into large plants of higher quality. Weak clones are susceptible to disease and bug infestation. Cloning is very rough on the mother and fresh cutting. Avoid taking too many clones from one mother plant in one day. When mother plants lose a lot of their vegetative growth, they can become weak. A weak mother plant can only provide weak clones(a problem you are already trying to avoid).

Follow these step by step instructions to ensure you have a successful cloning system.

Mother Plant - Ready to Clone — The mother plant could produce 4 or 5 fresh cuttings at this point.

First identify the best part of the plant to clone. This can vary a little depending on the type of plant. For the most part you want to have a long enough stem to fit through your growth medium. Use a razor blade or trimmers to cut a clone at a 45 degree angle. Cut at a node where another branch will grow out. The old stem will appear to split into two new stems. Those two stems can turn into two strong clones or one very strong clone. You have the power to decide.

Plant propagation — The line is exactly where you should cut your clone. Below the line the new growth is sprouting out.

Once you have cut the clone from the main stem, you want to cut off any large leaves because they will drain the cutting of its moisture. Do not fear, the leaves will grow back. The bottom 6-8 inches of the steam should be completely clear of leaves.

Dip the end of the stem in your favorite Cloning Gel. I prefer Earth Juice for organic applications and Clonex for flower types.

Next put the cutting into its own growth medium to be put into your cloning system. The growth medium could be a rockwool cube, a net pot of hydroton, or a neorepene disc. After a few hours if you notice your clones are sagging or wilting, gently mist them with plain water. DO NOT OVER DO IT. You want the plant to feel the need to grow roots to find water and nutrients. Good Luck Gardeners! Feel free to leave comments below if you have any questions.

7 Tips to Keep Your Mother Plants Healthy

Mother plants are essential for maintaining a continual propagation system. A strong mother plant is the first step to taking perfect cuttings. Weak cuttings turn into slow and sometimes weak plants. A weak clone is very susceptible to pest and disease problems. The plant is already under going immense stress and an unnoticed infestation can kill it. Here are 7 tips to keep your mother plants healthy and inevitably take stronger cuttings.

1. Trim off yellowing, brown, dried, wilted, and dead leaves – Dying leaves are a great place for bugs to hang out. Your mother plant may be wasting energy trying to save dying leaves. Cut your losses and focus the new growth.

Trim dying leaves as a method of pest and disease control — Cut leaves like the yellow ones off. The leaf that is mostly green and brown and the tip is worth keeping on the plant. Trim the brown part and the plant will still utilize the leaf for energy.

2. Use small amounts of nutrients – Salt lock up and over-fertilization are the last thing you want for your beautiful mother plant.

3. Try Mother Plant nutrient formula – I have personally not tried this bio-organic formula, but I have heard it works pretty well. There seems to be a lot of buzz about it in the indoor gardening magazines.

4. Use a big container if you plan to take many clones from a large mother plant – Roots are a vital part of healthy vigorous growth. A dense root zone will allow your mother to recover from cuttings quicker. Bigger roots means bigger plants.

5. Water frequently – Use a drip system or hydroponic method to ensure your mother plant gets as much water as it needs.

6. Do not cut more than 20% of the healthy foliage at a time. Taking too many cuttings at a time can stress your mother plant. The plant should recover, but it may actually slow down growth because of the amount of energy it takes to recover. The plant needs leaves to catch sunlight for photosynthesis.

7. Watch Closely for bugs and pests – Use a magnifying glass to check your plants! You never know what you may find. Any small pest infestation on your plant will transfer to your clones and potentially your whole cloning system. If it makes to the next stage before you notice you may be dealing with a major infestation later on. Preventative pest control is the best pest control.

BONUS TIP: Do not keep mother plants with a disease or genetic disorder. It sounds prejudice, but they aren’t people. Diseased mothers can pass the disease on to the clones. The disease may not strike the plant until late in it’s lifetime. By this time it is too late and you have already wasted your resources. Not Hydroponic Economical… Keep the green thumbs up!

It Starts with Good Genetics

Have you ever started a batch of seeds and had a really top notch plant that just seemed better than the rest? Have you ever been to a friend’s place and seen an interesting plant you would like to add to your collection? It is actually relatively simple to do these things without going out and buying another version of the same plant. When a cutting is taken from a ‘mother plant’ and dipped in rooting hormone, roots will form and it will become a new plant. The new plant will be exactly like the old one in every way. That is the reason you hear people talking about cloning plants. There is no top secret cloning machine that pops out perfect plants ready to flower every time. Although. . . that would be nice… but that takes the method out of proper clone taking practices.

If you get a seedling that is just plain better than the others or is one you would like to keep for your next crop, keep it around. Once its established you can cuttings from strong stems to become healthy new plants. There is sacrifice when you give up your best plant, but it more than pays its self back. Your next harvest could be a set of clones from your strong mother plant. That means every plant will be as strong as the strongest one on your second round and however long you keep the mother thriving. You can take clones of clones for up to 20 generations. There are limitless ways to keep genetics around. Sometimes after so many cuttings are taken, the plant may become weaker and grow slower than it originally was. That means its time to get out the seed starting kit and look for a new mother.

Humidity is an Overlooked Factor in Cloning Systems

From my experience and what I’ve been reading on hydroponic forums, people all around are having faster cloning rates using a humidity dome. Humidity domes come in many forms. A simple dome is a clear plastic structure with just a few holes for oxygen exchange. The structure sits so that it is covering all the plants without smashing them. Spraying a fine mist along the walls of the dome will help boost the humidity. The more plants per sq. inch of space will also increase the humidity, but having clones packed in too tightly could cause them to fight for light, air, and moisture. The struggle may cause unnecessary stress instead of beneficial humidity. Make sure to keep an eye on the temperature when the humidity dome is on. It may lock in heat in its enclosed structure. Simply remove the dome for a few hours so the temperature can lower and fresh oxygen can be swept to the leaves. This is a good time to re-mist the dome so the humidity is high when you put it back into action.